Semi-Transparent Enclosure for X6-2mini
General
This semi-transparent two piece enclosure is a replacement option to the X6-2mini standard opaque black enclosure. The smoked black color obscures the internal electronics but allows viewing of the status LEDs. The ability to see the status LED indicators is convenient for confirming device operation during application development. The enclosure parts are friction locked and easy separated with a flat screwdriver.
In stock. Usually ships within 24hrs.
Features
System status is indicated by three LEDs. The blue status LED blinks once per second indicating a properly operating system. The red data LED blinks when data is written or read from the microSD memory card. In data logging mode, the period at which the red LED1 blinks depends on the sample rate and other configuration settings. The red charge LED indicates when lithium-polymer battery is charging. The charge indicator will turn off when the battery is fully charged.
The X6-2mini also includes a switch pad on the printed circuit board (labeled S1) that can accommodate an on/off button. The button must be a SPST normally open momentary on switch. We recommend the C&K Components KMR241GLFS.